Industrial and Military Gauges

2″ – Fuel Level Gauge

2″ – Fuel Level Gauge

Fuel Level gauge operates by sending a low amperage current through the gauges’s meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc. As the sender’s resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. Available for MG systems, J1939 CAN Bus or J1939 Stand-Alone systems and mechanical types.

Performance Tips:

  • Calibration
    • GM Type = 0-90 ohms
    • Ford/Chrysler = 73-10 ohms
    • SW/AMC/Marine type = 240-33 ohms
  • Resistance can be measured with an ohmeter at the sender at empty and full to determine correct gauge before ordering.

Overview of Features:

  • Anti-scratch glass lens
  • Plastic Cases for corrosion resistance and long life
  • 12 vDC negative ground
  • Can be adapted for 24 vDC systems
  • Available in standard or Metric values

Gauge Sizes Available
2″ – Hole size: 2.0625″ (53mm)

Talk to an Expert

A conversation is the best way to start addressing your electronics and technology challenges. Discover all the possibilities for your next project – talk to an expert.